Entourage V6-3.8L (2009)
Fuel Pressure Regulator: Service and Repair
Removal(including Fuel Filter And Fuel Pressure Regulator)
1. Preparation
(1) Remove the 2nd seat(s) .
(2) Remove the Service Cover (A).
(3) Disconnect the Fuel Pump Connector (A).
(4) Start the engine and wait until fuel in fuel line is exhausted.
(5) After the engine stalls, turn the ignition switch OFF.
2. After disconnecting the fuel feed quick connector (A), the fuel pump connector (B) and fuel tank pressure sensor connector (C), remove the fuel
pump cover (D).
3. After removing the opening nut (A), remove the fuel pump from the fuel tank.