hyundai Workshop Repair Guides

Hyundai Workshop Service and Repair Manuals

Seat Position Sensor > < Seat Occupant Sensor|Locations|Page 6057
Page 2
background image

is no interference. During the tightening, be careful not to deform the seat rail or seat structure. If the accuracy check is still not inside the
standard value, replace the seat leg assembly.

-

When WCS reset operation not finished normally, replace the seat leg assembly.

5. After installing the OCS, confirm proper system operation : Turn the ignition switch ON, the SRS indicator should be turned on for about six

seconds and then go off.
Telltale lamp will turn on for 4 seconds and be turned off for 3 seconds. After the 7 seconds, it shall remain off if the OCS does not require
suppression and the passenger airbag is enabled.

Seat Position Sensor > < Seat Occupant Sensor|Locations|Page 6057