Entourage V6-3.8L (2009)
Power Sliding Door Switch: Testing and Inspection
Power Sliding Door Detent Switch
Inspection
1. Detent switch detect the latch position within latch assembly.
2. Check the power sliding door control module input/output value by using the diagnostic tool.
3. When checking the detent switch, select a vehicle type and "POWER SLIDING/TAIL GATE" menu.
4. Select the "POWER SLIDING DOOR".
5. Select the detent sensor output. And then check the detent switch output with operating power sliding door.
** Above voltage and numerical value may be different from the real value.
6. If there is no change in output, change the latch assembly.
