Entourage V6-3.8L (2009)
4. Remove the lower arm mounting bolts (A, B).
Replacement
1. Using the special tools(09214-32000 & 09216- 211000), remove the bushing from the lower arm.
2. Apply soap solution to the following parts.
A. Outer surface of the bushing.
B. Inner surface of the lower bushing mounting part.
3. Using the special tools(09214-32000 & 09216-21100), install the busing on the lower arm.
CAUTION:
Insert bushing in the direction shown in the illustration.
Separation force is over 100 N.m (1000Kgf, 2204 lbf)
Installation
