Entourage V6-3.8L (2009)
Control Arm: Service and Repair
Rear Upper Arm
Components and Components Location
Components
Repair Procedures
Removal
1. Loosen the wheel nuts slightly. Raise the rear of the vehicle, and make sure it is securely supported.
2. Remove the rear wheel and tire (A) from rear hub (B).
CAUTION:
Be careful not to damage the hub bolts (C) when removing the rear wheel and tire (A).
3. Remove the brake caliper mounting bolts (A), and then place the brake caliper assembly (B) with wire as shown in the illustration.