Entourage V6-3.8L (2009)
NOTE:
Bring clamp (C) of stabilizer bar (A) into contact with bushing (B).
2. Install the bracket on the bushing (B).
3. After tightening the bolts of the bushing bracket temporarily, install the bushing bracket on the opposite side.
4. Install the stabilizer bar bracket mounting bolts (A) to the sub frame.
Tightening torque :
39 - 60N.m (3.9 - 6.0kgf.m, 28.2 - 43.4lb-ft)
5. After lifting the jack which supports the sub frame, install the four bolts (A) of the sub frame and the eight bolts (B) of the guide bracket.
Tightening torque :
Bolt (A) : 160 - 180N.m (16 - 18kgf.m, 115.7 - 130.2lb-ft)
Bolt (B) : 45 - 60N.m (4.5 - 6.0kgf.m, 32.5 - 43.4lb-ft)
6. Install the engine mounting bolts (A, B)
Tightening torque :
65 - 85N.m (6.5 - 8.5kgf.m, 47.0 - 61.5lb-ft)
