Entourage V6-3.8L (2009)
3. Install the solenoid (B) and solenoid lever (A).
4. Install the switch assembly (A) and 'P' position switch assembly.
Tightening torque :
1.3 - 1.9 Nm(13 - 19 kgf.cm, 0.95 - 1.38 lb-ft)
5. Connect the solenoid connector (A) and install the indicator panel (B).
6. Install the shift lever knob (A) by tightening the two screws.
Tightening torque :
2 - 3 Nm(20 - 30 kgf.cm, 1.45 - 2.18 lb-ft)
