hyundai Workshop Repair Guides

Hyundai Workshop Service and Repair Manuals

Radio - Poor Sound Quality|Page 5015 > < Radio - Static On AM Band|Page 5010
Page 1
background image

Radio/Stereo: All Technical Service Bulletins
Radio - Poor Sound Quality

Group:

ELECTRICAL

Number:

003

Date:

JULY 1986

Model:

EXCEL

Subject

RADIO SOUND QUALITY
On models equipped with the optional high power four speaker radio, you may receive some negative comments from customers regarding radio sound
quality. We have found that in some cases the front and rear speaker sets may be out of phase with each other. This condition results in a somewhat
diminished response in both the high and low frequencies. This condition is most noticeable when the fader control is adjusted for equal balance between
the front and rear speakers.

To improve this condition it is necessary to reverse the leads to the front speakers (see following procedure). However, this corrective action should only
be performed as a result of expressed customer dissatisfaction. The resulting increase in radio performance is very small and perceptible by only the most
critical customers. For this reason, we suggest that the customer be consulted and allowed to evaluate the performance of the audio system prior to
leaving your dealership.

Procedure

1.

Locate and disconnect the speaker connectors in the left and right toe board side panels.

2.

Disengage the leads from both the right and left body side connectors (female connector) and reverse their positions within the connector housing.

3.

Reconnect the connectors and test.

Production Changes Effective

Date

VIN

Radio - Poor Sound Quality|Page 5015 > < Radio - Static On AM Band|Page 5010