hyundai Workshop Repair Guides

Hyundai Workshop Service and Repair Manuals

Fuel Injector - Cleaning|Page 2959 > < Fuel Injector - Cleaning
Page 2
background image

V6 Sonata

-

Remove adapter from fuel rail and reinstall fuel pressure line.

-

Remove the return line plug from fuel pressure regulator and reinstall fuel return line.

-

Reconnect the fuel pump connector at the fuel tank.

2.4L Sonata

-

Remove the 12 mm cleaning adapter hose from fuel rail and reinstall fuel pressure line making sure the (2) copper washers are in their correct
places.

-

Remove the return line plug from fuel pressure regulator and reinstall fuel return line.

-

Reconnect the fuel pump connector at the fuel tank.

All Other Hyundai vehicles

-

Remove vehicle fuel hose from the 12 mm cleaning adapter hose.

-

Reinstall vehicle fuel hose to the fuel filter making sure the (2) copper washers are in their correct places.

-

Remove the return line plug from fuel pressure regulator and reinstall fuel return line.

-

Reconnect the fuel pump connector at the fuel tank (fuel pump connector on Elantra is under the rear seat).

10.

Immediately start the engine and run it at 2000 RPM for 5 minutes, then rev the engine several times to exhaust any dislodged carbon.

CAUTION:
CHECK THE FUEL LINE AND CONNECTIONS FOR LEAKS IMMEDIATELY AFTER STARTING ENGINE.

11.

Add the Fuel Injector System Cleaner to the fuel tank (make sure there is at least 2 gallons of fuel in the tank).

Fuel Injector - Cleaning|Page 2959 > < Fuel Injector - Cleaning