Excel L4-1468cc 1.5L SOHC (8 VALVE) (1986)
Axle Beam: Service and Repair
Fig. 1 Exploded view of rear axle & suspension
Fig. 2 Installing bushing ``B'' into left suspension arm
REMOVAL
When removing rear suspension assembly, ensure that front of vehicle is adequately supported to prevent tilting during removal procedure.
1.
Remove brake drums and rear brake assemblies.
2.
Remove muffler.
3.
Remove coil spring as outlined previously.
4.
Temporarily reinstall shock absorbers, then disconnect brake hoses from suspension arms.
5.
Remove shock absorbers and suspension to body retaining bolts, then the rear suspension assembly.