Excel L4-1468cc 1.5L SOHC (8 VALVE) (1986)
Technical Service Bulletin # 9340018
Date: 931001
A/T - Case Gasket Replacement Precautions
Group: TRANSAXLE
Number:: 93-40-018
Date: OCTOBER, 1993
Model: EXCEL, SONATA
Subject:
REPLACEMENT OF AUTOMATIC TRANSAXLE CASE GASKET
Description
Metal automatic transaxle case gaskets have been used in production for several years. Since, the thickness of the metal and asbestos gaskets is not the
same, when replacing an asbestos gasket (installed before the date listed below) with a metal gasket, check the end play of the transfer shaft and the
differential case. If the transfer shaft and differential case end play are not within specification, follow the service procedure in this bulletin.
TRANSFER SHAFT TYPES
Two types of transfer shafts, each with a different end play checking method, are used in the automatic transaxle.
"A" TYPE
The bearing is installed on the end of the transfer shaft. The end play can be adjusted with the spacer, which is located between the transfer shaft bearing