hyundai Workshop Repair Guides

Hyundai Excel 15L SOHC Workshop Service and Repair Manuals

ABOUT US
Transmission Speed Sensor, A/T > < A/T - Fluid Leak From The Bell Housing Area|Page 3427

1986 Excel L4-1468cc 15L Automatic Transmission Position Switch/Sensor

Page 1
background image

Transmission Position Switch/Sensor: Service and Repair

Fig. 5 Adjusting neutral start (inhibitor) switch

 

1.

Place manual control lever in Neutral position, then remove control lever retainer and control lever.

2.

Disconnect electrical harness, then remove switch retaining bolts and switch assembly.

3.

Reverse procedure to install, then adjust switch as follows:

a. With manual control lever in Neutral position, turn switch body until wide end (A) of control lever, Fig. 5, overlaps switch body flange.
b. Hold switch body in position, then torque retaining bolts to 8 ft. lbs.

Transmission Speed Sensor, A/T > < A/T - Fluid Leak From The Bell Housing Area|Page 3427