hyundai Workshop Repair Guides

Hyundai Workshop Service and Repair Manuals

Relays and Modules - Transmission and Drivetrain > < Components and Components Location|Page 5254
Page 10
background image

6 - 8 Nm(0.6 - 0.8 kgf.m, 4.34 - 5.78 lb-ft)

Bolt size(4) :M6x1.0x14.5mm

CAUTION:
-

Be careful not to damage the fitting surfaces of the transmission case and the oil pan.

-

Be careful not to deform the oil pan.

-

Be reminded that bolts might be damaged if tightened too much since the gasket is cork-made and there is little tightening sense.

19. Install a new gasket and the drain plug to the oil pan.

Tightening torque :
17.9 - 23.0Nm(1.79 - 2.30 kgf.m, 12.95 - 16.63 lb-ft)

20. Refill the ATF. (refer to Procedure of ATF level adjusting)

Relays and Modules - Transmission and Drivetrain > < Components and Components Location|Page 5254