Pony Pickup (Canada) L4-1238cc 1.2L SOHC (1986)
/l4-1238cc_1.2l_sohc/Page-209003.png)
circuits. Reposition any wires that put tension on the PG connector; there must be slack in the PG wiring assembly (check that there is no tension
in the wires when the engine is under load in Drive). Refer to the electrical section of the appropriate Shop Manual and check the ground for the
shielded wiring.
5.
Repair or replace the harness if necessary.
WARRANTY INFORMATION:
Normal warranty operation codes and times apply.
