Santa Fe L4-2.4L (2001)
1.
Remove the seat track end covers and loosen the 4 mounting bolts/nuts. Just loosen them a few turns.
2.
Reach under the seat and loosen the 4 seat cushion mounting bolts.
3.
Sit in the seat and slide it forward and backward, latching it and releasing it in different places to align the seat tracks.
4.
With the seat tracks latched into place with the seat 3/4 of travel to the back, tighten the front nuts securely.
5.
Sit in the seat and verify it latches evenly, then move it forward until the rear bolts can be tightened. Tighten the rear bolts.
6.
Move the seat back to the 3/4 position, reach under the seat and tighten the seat cushion mounting bolts securely.
7.
Verify the seat is properly adjusted and it easily latches into place.
8.
Retighten the mounting nuts/bolts to the torque specified in the shop manual.
9.
Install the trim coverall the trim covers.
Please refer to the appropriate shop manual for other model year vehicles.
