hyundai Workshop Repair Guides

Hyundai Workshop Service and Repair Manuals

Electronic Brake Control Module > < Brakes - ABS Pump Self-Check Noise Explanation
Page 1
background image

Brake Fluid Pump: Technical Service Bulletins
Brakes - ABS Pump Self-Check Noise

Group: CHASSIS

Number: 05-50-004

Date: JUNE, 2005

Model:
1999 TO CURRENT SONATA, XG, SANTA FE AND TUCSON

Subject:
ABS PUMP SELF-CHECK NOISE

DESCRIPTION:

The Anti-lock Brake System (ABS) performs a hydraulic pump self-check test during the first acceleration after each ignition switch cycle. During this
test, the ABS computer tests the pump modulator valves, solenoids and motor for operation. This test occurs at a vehicle speed between 0 and 8 mph.
During this test, a noise (customers may describe a rattle, groan, growl or gurgling) may be heard and felt through the brake pedal. This noise is heard
during the first 30 feet of vehicle motion and only lasts a second. If any faults are found, the system disables the anti-lock braking function and will
illuminate the warning lamp and set a diagnostic trouble code.

The purpose of this bulletin is to emphasize that this noise is the result of a normal function self-check test and it cannot be eliminated by replacing the
Hydraulic Electronic Control Unit (HECU).

NOTE:

The HECU interactive pump self-diagnostic test and the related pump activation noise does not affect the ABS operation.

Electronic Brake Control Module > < Brakes - ABS Pump Self-Check Noise Explanation