Santa Fe L4-2.4L (2001)
11.
Pump the brake pedal several times, and then loosen bleeder screw # 1 (RR wheel) until fluid starts to run out without bubbles.
12.
Repeat step # 11 until there are no more bubbles in the fluid from each wheel in the sequence shown in the illustration.
13.
Tighten the bleeder screw.
Bleeder screw tightening torque:
7 - 9 N.m (70-90 kg.cm, 5-6.6 lb.ft)
14.
Disconnect the Hi-Scan Pro.
