Santa Fe L4-2.4L (2001)
Fuse Block: Testing and Inspection
Relay Box (Engine Compartment)
1. Be sure there is no play in the fuse holders, and that the fuses are held securely.
2. Are the fuse capacities for each circuit correct?
3. Are there any blown fuses?
If a fuse is to be replaced be sure to use a new fuse of the same capacity. Always determine why the fuse blew first and completely eliminate the
problem before installing a new fuse.
CAUTION: Never use a fuse of higher capacity than specified.
CHECKING FUSES
A blade type fuse has test taps provided to allow checking the fuse itself without removing it from the fuse block. The fuse is good if the test lamp lights
up when its one lead is connected to the test taps (one at a time) and the other lead is grounded. (Turn the ignition switch so that the fuse circuit becomes
operative.)