Santa Fe L4-2.4L (2001)
h. Battery is disconnected during the alarm state.
4. Code saving method.
a. Remove the lower crash panel.
NOTE: Don't disconnect the negative (-) battery terminal.
b. To store new codes
-
Activate the keyless entry/receiver unit and change the code saving switch of the receiver unit from "OFF" to "SET".
-
The secret codes from the transmitter will be stored into the receiver unit when the door lock button or unlock button is pressed on the
transmitter.
-
Save the 2nd transmitter codes in the same manner.
c. Return the code saving switch of the receiver unit from "SET" to "OFF".
d. Install the lower crash panel.
