Santa Fe L4-2.4L (2001)
16.
Hi-Scan Pro re-initializes the system.
17.
When the "ECM & TCM COMPLETED" message is displayed, the TCM reprogramming process is finished.
NOTES:
^
The new ECM and TCM IDs are displayed when the new TCM software download process is finished.
^
Before turning the Hi-Scan Pro OFF, check the new ECM & TCM IDs displayed on the Hi-Scan Pro screen to verify that the correct ECM and
TCM software have been down loaded.
^
Refer to the ECM and TCM specification table shown in this TSB.
18.
Start the engine to check for proper operation.
