Santa Fe L4-2.4L (2001)
NOTE
The Hi-Scan Pro detects the current ECM ID and displays it for about 1 second.
14.
The boot program will download first, then the main program and the interrupt vector program.
NOTE
^
The current ECM ID Will be replaced by the new ECM ID.
^
To be prepared in case a reprogramming error occurs, write down the old and new ECM IDs displayed on the Hi-Scan Pro screen during
the automatic update procedure.
^
The recorded ECM IDs will be used during the Manual Update Procedure if the program does not download correctly.
^
If the Hi-Scan Pro does not download the program properly, use the Manual Update Procedure following this section.
WARNING
Do not interrupt the reprogramming at any time. The ECM will be rendered inoperative if the program does not download completely.
15.
Hi-Scan Pro establishes communication.
16.
When the REPROGRAMMING COMPLETED message is displayed, the ECM reprogramming process is complete.
