hyundai Workshop Repair Guides

Hyundai Workshop Service and Repair Manuals

Vehicle/Wheel Speed Sensors - Diagnostics|Page 3156 > < Vehicle/Wheel Speed Sensors - Diagnostics|Page 3154
Page 5
background image

On the 2.5L V6 Sonata, the DTC P0500 (the Hi-Scan Pro description is again "Vehicle Speed Sensor") indicates a condition with the RF-WSS mounted
on the right front hub or related circuitry.

Thus, for the Sonata, the same DTC (P0500) on different engine options (2.4L versus 2.5L) relate to a different sensor (one mounted on the transmission
and the other mounted to the right front hub).

RECOMMENDATIONS:

^

Because the code alone does not pinpoint which sensor/circuit may be related to the code, refer to the table on the following page when working on a 
VSS related code.

^

The condition can be verified by checking the operation of the speedometer and/ or the vehicle speed readout on the Hi-Scan Pro.

^

Once the correct sensor/circuit has been determined, diagnose the condition by checking the integrity of the circuit and the function of the sensor.

DIAGNOSTIC PROCEDURE EXAMPLE:

1.

The Check Engine Light is ON.

VEHICLE: 2001 Elantra.

2.

A VSS related DTC is stored in the ECM (P0500 or P0501).

EXAMPLE: DTC P0501 ("Vehicle Speed Sensor -- Abnormal¨) stored in ECM.

3.

Using the table, determine which sensor is related to the DTC.

EXAMPLE: The table indicates that the RF-WSS is related to the code P0501.

4.

Diagnose the related electrical circuit and the sensor for proper function.

EXAMPLE: Check that the RF-WSS circuit and sensor are functioning properly. Make sure that the "tone-wheel" on the RF-axle is not damaged.

Vehicle/Wheel Speed Sensors - Diagnostics|Page 3156 > < Vehicle/Wheel Speed Sensors - Diagnostics|Page 3154