Santa Fe L4-2.4L (2001)
Harness Inspection Procedure <2.7 V6>
SENSOR INSPECTION
1. Disconnect the knock sensor connector.
2. Measure the resistance between terminals 2 and 3.
Standard value: about 5 Mohm. [at 20 °C (68 °F)]
3. If the resistance is zero, replace the knock sensor. Knock sensor 16 - 8 Nm (160 - 250 kg.cm, 11.8 - 18.4 lb.ft)
4. Measure the capacitance between the terminal 2 and 3.
Standard value: 800 - 1600 pF