Santa Fe L4-2.4L (2001)
Add the following note under the title - REAR WHEEL ALIGNMENT on the affected pages of the shop manuals (see example page shown):
NOTE:
1.
DO NOT USE POWER TOOLS FOR LOOSENING OR TIGHTENING THE CAM BOLT NUTS.
2.
Loosen each cam bolt attaching nut without moving the cam bolt head position.
3.
Then adjust the rear wheel toe and/or camber angle using the procedures outlined in the affected shop manuals.
4.
After the alignment adjustment, tighten the bolt attaching nuts to the specification.
104-118 lb.ft (140-160 Nm, 1400-1600 Kg.cm).
NOTES EXPLAINED:
