Santa Fe L4-2.4L (2001)
18. Confirm the two steel balls are installed on the valve body.
19. Install a new valve body gasket, P/N 46264-39510, to the valve body.
20. Carefully align the manual valve on the valve body to the manual control shaft and reinstall the valve body.
21. Install the valve body and tighten the valve body bolts to 7-8 lb.ft (10-120 kg.cm).
22. Reconnect the solenoid harness to the solenoids and oil temperature sensor.
23. Adjust the solenoid harness to prevent contact with either the valve body or control shaft detent. Reinstall the harness snap ring and reconnect the
harness.
24. Reinstall the control shaft detent.
25. Apply Permatex Ultra Gray Gasket Sealant or Hyundai Ultra Gray Gasket Sealant, (P/N 00231- 13800) to the valve body cover and reinstall the
cover. Tighten the bolts to 6-7 lb.ft (80-100 kg.cm).
26. Reinstall the radiator hose and add engine coolant to the radiator.
