Santa Fe L4-2.4L (2001)
Seals and Gaskets: Service and Repair
DRIVE SHAFT OIL SEAL REPLACEMENT
1. Disconnect the drive shaft form the transaxle.
2. Using a flat-tip screwdriver, remove the oil seal.
3. Using the special tool (09431-21200), tap the drive shaft oil seal into the transaxle.
4. Apply a coating of gear oil to the oil seal.
Transaxle gear oil: Hypoid gear oil, SAE 75W/ 90 conforming to API GL-4 or higher. Disconnect the drive shaft from the transaxle.
