Santa Fe L4-2.4L (2001)
8. Apply sealant around the edge of the glass.
NOTE: Apply the adhesive within 5 minutes after applying the primer.
9. Apply a light coat of body primer to the original sealant remaining around the window opening flange. The glass should be installed within 10
minutes after you apply the primer.
10. Using suction cups or the special tool (09861 - 31400), lower the glass over the opening, align it with the marks made in step 3 and set it down on
the sealant.
11. Remove excess adhesive with a putty knife or gauze. Fill any cavities around the windshield glass.
12. After one hour, perform a water-leak test for the windshield. Use a cold water spray, being careful not to direct a. powerful stream of water on the
new adhesive material. Allow water to spill over the edges of the glass.
