Santa Fe V6-2.7L (2003)
3. Securely install the resin bushing of the accelerator cable on the end of the accelerator arm.
INSTALLATION
1. When installing the return spring and accelerator arm, apply multi-purpose grease around each moving point of the accelerator arm.
2. Apply sealant to the bolt mounting hole and tighten the accelerator arm bracket.
Tightening torque
Accelerator arm bracket bolts: 8 - 12 Nm (80 - 120 kg.cm, 6 - 7 lb.ft)
3. Securely install the resin bushing of the accelerator cable on the end of the accelerator arm.