Santa Fe V6-3.5L (2004)
2. Remove the front wheel speed sensor after disconnecting the wheel speed sensor connector (A).
REAR WHEEL SPEED SENSOR
Remove the rear wheel speed sensor (A) after disconnecting the wheel speed sensor connector.
INSPECTION
1. Connect an ohmmeter between the wheel speed sensor terminals and measure the resistance.
Service standard
Front, Rear: 1,385 - 110 Ohms
2. Connect a voltmeter between the wheel speed sensor terminals and measure the voltage by turning the wheel.
NOTE: Set the voltmeter to measure AC voltage.
Service standard: AC voltage detected.
