Santa Fe V6-3.5L (2004)
16. Insert the wires of the new fan motor side connector into the cut corrugated tube, then tape the cut corrugated tube and install the connector cover.
17. Apply the above procedures (step 4 to 15) to the fan motor harness side connector.
18. Fix the fan motor side connector (B) to the fan shroud, then connect it to the fan motor harness side connector (A).
19. Reconnect the battery cable to negative terminal of the battery
20. With engine running at idle turn on the A/C or Defroster and verify that the cooling fan connection was repaired properly the cooling fan should
come on.