Santa Fe V6-3.5L (2004)
9. Remove the delivery pipe with the fuel injector and the pressure regulator.
NOTE: When the delivery pipe is removed, be careful not to drop an injector.
10. Disconnect the wiring harness of the coolant sensor assembly.
INSPECTION
SURGE TANK AND INTAKE MANIFOLD
1. Check the surge tank and intake manifold for damage, cracking or restriction of the vacuum outlet port, water or gas passages.
2. Check for distortion on the surface using a straight edge and feeler gauge.
Standard value: 0.15 mm (0.006 inch) or less
Service limit: 0.2 mm (0.0078 inch)
INSTALLATION
Install the intake manifold and delivery pipe reversing the order of the removal procedure.
Tightening torque
Intake manifold: 12 - 15 Nm (120 - 150 kgf-cm, 9 - 11 ft. lbs.)
Surge tank stay: 15 - 20 Nm (150 - 200 kgf-cm, 11 - 14 ft. lbs.)
