hyundai Workshop Repair Guides

Hyundai Workshop Service and Repair Manuals

All Technical Service Bulletins for Driver/Vehicle Information Display: > < Door Switch|Locations|Page 9841
Page 1
background image

Driver/Vehicle Information Display: Customer Interest
Interior - Overhead Console Calendar Leap Year Reset

Group
ELECTRICAL

Number
04-90-007

Date
APRIL, 2004

Model
2003-2004 SANTA FE

Subject
SANTA FE CALENDAR - RESET AFTER LEAP YEAR FEBRUARY 29

DESCRIPTION:

The optional electronic calendar on the overhead console may not display the correct date after February 29th of a leap year. If required, set the correct
date by following the instructions below.

PROCEDURE:

1.

First, set the internal clock of the digital calendar (if equipped).

^

Press and hold "M" button for at least 3 seconds until digits for HOUR blinks.

^

Use UP or DOWN button to adjust hour according to military time (example: 3 = 3AM, 15 = 3PM).

^

Press "M" button to set MINUTES and then press UP or DOWN button to adjust minutes.

^

Press "M" button when finished.

2.

Next, set the date of the digital calendar.

^

Press "M" button to display blinking YEAR, use UP or DOWN button to adjust year.

^

Press "M" button again to display blinking MONTH, use UP or DOWN button to adjust MONTH.

^

Press "M" button again to display blinking DAY, use UP or DOWN button to adjust DAY.

^

Press "M" button once again when finished.

All Technical Service Bulletins for Driver/Vehicle Information Display: > < Door Switch|Locations|Page 9841