Santa Fe V6-3.5L (2004)
8. Motor power is normal.
3. Method of initialization
1. Turn IG KEY ON (below 1 second) (Do not start engine)
2. Turn IG KEY OFF and keep the state (approx. 105) until the control relay is turned OFF.
3. Turn IG KEY SW ON (maintaining 1 second) again to record the rotor position adaption value on EPROM and the initialization operating is
finished.
4. The completion of initialization is verified by operating accelerator with engine running or IG KEY SW ON to check the throttle valve for
moving.
5. After initialization is finished once, it's no more needed when removing the terminal of battery. (i.e., the data on EPROM is read to control the
motor)
