Santa Fe V6-3.5L (2004)
Actuators and Solenoids - A/T: All Technical Service Bulletins
A/T Controls - MIL ON/Failsafe Mode/Multiple DTC's Set
Group:
TRANSAXLE
Number:
05-40-006-1
Date:
August, 2005
Models:
1999 - Sonata
2001 - Elantra, Santa FE & XG,
2003 - Tiburon
2005 - Tucson
Subject:
ATA SOLENOID DIAGNOSTIC CODES P0740, P0741, P0742, P0743, P0746, P0748, P0750, P0755, P0760, P0765, P0770
This TSB supersedes TSB # 05-40-006 to include DTC descriptions in Step 10.
DESCRIPTION:
Incorrect operation of the transaxle solenoids may result in the following three symptoms:
1.
Check Engine Light illuminated
2.
Transaxle held in 3rd gear "Fail-safe"
3.
Diagnostic Trouble Codes P0740, P0741, P0742, P0743, P0746, P0748, P0750, P0755, P0760, P0765 or P0770 set.
NOTE:
Do NOT replace the transaxle for solenoid codes listed as open/short. Instead, follow the repair procedure shown below.
REPAIR PROCEDURE:
1.
Using a Hi-Scan Pro, check for DTC in both the "Engine" and "Automatic Transaxle" menus. Record the DTC and description.
2.
From the Hi-Scan Pro, select:
^
"Hyundai Diagnosis" menu
^
"Vehicle
^
"Auto Transaxle" menu
^
"Actuation Test"
^
Press the F1 button (STRI) and test the LR, UD, 2ND, OD, DCC and FSV solenoid (if applicable). Monitor the Hi-Scan and listen for a
solenoid sound from the engine compartment.
