Santa Fe V6-3.5L (2004)
11. Install the vane plates with the round end facing outward.
12. Install the gasket and rear cover.
13. Tighten the suction connector.
INSTALLATION
1. Install the oil pump to the oil pump bracket.
2. Install the suction hose.
3. Install the ribbed V-belt and adjust its tension.
4. Connect the pressure hose to the oil pump, and the suction hose to the oil reservoir.
NOTE: Install the hoses so that they are not twisted and they do not come in contact with any other parts.
5. Replenish the reservoir.
Recommended fluid: Power steering fluid (PSF-3)
6. Bleed the system.
7. Check the oil pump pressure.
8. Install parts by referring to the torque specification.
