Santa Fe V6-3.5L (2004)
8. Using a plastic hammer, drive out the axle hub from the driveshaft.
9. Remove the front axle assembly.
DISASSEMBLY
1. Remove the brake disc from the hub.
2. Remove the snap ring.
3. Remove the hub from the knuckle using the special tools (09517-21500, 09517-3A000, 09517-29000).
-
Install the special tool to the hub and knuckle.
-
Tighten the nut of the special tool to disconnect the hub from the knuckle.
4. Using the special tools (09455-21000, 09545-34100), remove the wheel bearing inner race from the hub.
