Santa Fe V6-3.5L (2004)
Clutch Master Cylinder: Service and Repair
CLUTCH MASTER CYLINDER
COMPONENTS
REMOVAL
1. Drain the clutch fluid through the bleed plug.
2. Remove the clevis pin, split pin (cotter pin), and washer.
3. Disconnect the clutch line (master cylinder side).
4. Remove the master cylinder mounting bolt.
5. Remove the clutch line clips.
6. Hold the nut on the clutch line and loosen the flare nut on the clutch tube.
7. Remove the clip from the clutch hose to remove the clutch hose from bracket.