Santa Fe V6-3.5L (2004)
5. Install the release lever to the release fork.
6. Install the transaxle assembly to the engine.
CAUTION
If the transaxle assembly is installed to the engine without performing this step, the release bearing can be separated, as the release fork rotates
freely.
7. After finishing step 6, push the release lever to the arrow mark. If there is a click sound, the release bearing and clutch cover are aligned correctly.
If the Assembly does not snap into place, start with step 1 again.
Release lever operating range is 3° or less. If the range is over 3°, the release bearing and clutch cover are not aligned correctly. Push the release
lever to the arrow mark one more time.
