Santa Fe V6-3.5L (2004)
a. Remove the VL joint boot from the VL joint assembly.
b. Put marks on the mating parts with a scriber.
NOTE: Note the positions of balls so that they can be reinstalled in their original positions.
c. Remove the VL joint assembly from the front propeller shaft with a commercially available puller.
7. REMOVAL OF VL JOINT BOOT
When reusing the VL joint boot, apply adhesive tape to the splined section of the propeller shaft before removing.
INSPECTION
1. Check the propeller shaft yoke for wear, damage or cracks.
2. Check the propeller shaft for bends, twisting or damage.