Santa Fe AWD V6-2.7L (2007)
4.
Reinstall the rear wiper cover and confirm proper operation of the wiper arm.
NOTE:
No parts replacement required.
NOTE:
Do not submit a separate warranty claim for this procedure.
SERVICE PROCEDURE: FLOORMAT ANCHOR IMPROVEMENT
1.
Remove Driver's floormat.
2.
Mark the floor mat 1-1/2" from the left edge and 1" from the bottom edge.
3.
Using a hammer and a 9/16" or 14 mm socket punch a hole through the top side of the floormat at. Trim any excess fabric.
