Santa Fe AWD V6-3.3L (2009)
(13) Connect the ETC connector (A) and knock sensor connector (B).
(14) Connect the PCSV connector (A), MAP sensor connector (B), PCSV hose and ECM vacuum hose.
(15) Connect the RH injector connector (A), ignition coil connector (B) and VIS connector (C).
(16) Connect the RH oxygen sensor connector (A).
32. Install the engine mounting bracket (A).
Tightening torque :
B : 78.5 - 98.0N.m (8.0 - 10.0kgf.m, 57.9 - 72.3lb-ft)
C : 63.7 - 83.4N.m (6.5 - 8.5kgf.m, 47.0 - 61.5lb-ft)
