Santa Fe FWD L4-2.4L (2010)
Navigation System: Service and Repair
Removal
1. Disconnect the negative (-) battery terminal.
2. Remove the crash pad center grill (A).
3. Remove the crash pad center lower garnish (A).
4. Remove the center facia panel (A) after loosening the screws.
5. Remove the connectors.
6. Remove the mounting bolts then remove the audio unit (A).
7. Remove the audio unit after disconnecting the audio connectors and cable.
8. Installation is the reverse of removal.
Installation
1. Reconnect the navigation connector and antenna cable.