Santa Fe FWD L4-2.4L (2010)
Rear Bumper: Service and Repair
Replacement
NOTE:
-
Put on gloves to protect your hands.
-
When prying with a flat-tipped screwdriver, wrap it with protective tape to prevent damaged.
-
Take care not bend or scratch the cover and other parts.
1. Loosen the rear bumper side's mounting screws and clips.
2. Loosen the inside mounting bolts and screws.
3. Remove the rear bumper (A).
4. Disconnect the connectors (B).
5. Installation is the reverse of removal.
