Santa Fe FWD L4-2.4L (2010)
Front Door Panel: Service and Repair
Front Door Trim Replacement
Replacement
Front Door Trim Replacement
NOTE:
-
Take care not to scratch the door trim and other parts.
-
Put on gloves to protect your hands.
1. Remove the quadrant inner cover (A).
2. Remove the inside handle cover (A).
3. Loosen the door trim (D) mounting screws. Release the clips that hold the door trim, then remove the door trim by pulling it upward. Disconnect
the power window switch connector (A), power mirror connector (B), and door courtesy lamp connector (C).
4. Installation is the reverse of removal.
NOTE:
-
Make sure of connectors is plugged in properly and each rod is connected securely.
-
Make sure the door lock and opens properly.
