Santa Fe FWD L4-2.4L (2010)
Trunk / Liftgate Latch: Service and Repair
Latch Assembly Replacement
Replacement
Tailgate Trim Replacement
NOTE:
-
When prying with a flat-tipped screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
-
Put on gloves to protect your hands.
1. After loosening the screws the remove the tailgate trim (A).
2. Remove the upper trim (B) and side trim (C).
3. Installation is the reverse of removal.
NOTE:
-
Replace and damaged clips.
Latch Assembly Replacement
1. Remove the tailgate trim.
2. Disconnect the outside handle rod (A), actuator rod (B).
3. After loosening the mounting screws, then remove the latch assembly (A).
4. Disconnect the connector (B).