Santa Fe FWD L4-2.4L (2010)
6. Installation is the reverse of removal.
NOTE:
-
Make sure the tailgate opens properly and locks securely.
Lifter Replacement
1. Using a screwdriver (A), lift up slightly the socket clips (B) of both ends on the lifer (D), and then remove the lifter from the bracket (C).
2. Push the socket of the lifter into the bracket for installation.
Speaker Replacement
1. Remove the tailgate trim.
2. Disconnect the connector (A).
3. After loosening the mounting bolts, then remove the speaker (B).
4. Installation is the reverse of removal.
Tailgate Weatherstrip Replacement
NOTE:
-
Do net apply sealant to the body.
1. Remove the tailgate weather strip (A).