Santa Fe FWD L4-2.4L (2010)
Upper Side Moulding / Trim: Service and Repair
Replacement
Side Garnish And Side Sill Replacement
NOTE:
-
When prying with a flat-tipped screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damaged.
-
Put on gloves to protect your hands.
-
Take care not to scratch the body surface.
1. Loosen the mounting screws and clips, then remove the side garnish (A) and side sill (B).
2. Installation is the reverse of removal.
NOTE:
-
Replace any damaged clips.
