Santa Fe FWD L4-2.4L (2010)
Tightening torque
Brake hose to caliper:
24.5 - 29.4 Nm (2.5 - 3.0 kgf.m, 18.1 - 21.7 lb-ft)
Caliper assembly to carrier:
78.5 - 98.1 Nm (8.0 - 10.0 kgf.m, 57.9 - 72.3 lb-ft)
3. Remove the rear brake disc by loosening the screws (A).
Replacement
Rear Brake Pads
1. Loosen the guide rod bolt (A) and pivot the caliper up out of the way.
2. Replace shims (A), pad retainers (B), and brake pads (C).
Installation
1. Installation is the reverse of removal.
2. Use a SST (09581-11000) when installing the brake caliper assembly.