hyundai Workshop Repair Guides

Hyundai Workshop Service and Repair Manuals

Body Control Module|Locations|Page 3138 > < Body Control Module|Locations|Page 3136
Page 5
background image

T1 : 12 ± 0.2s, T2 : 12 ± 0.2s.

9. DAYTIME RUNNING LIGHT

DRL (DAYTIME RUNNING LIGHT) OPTION is classified into the following two cases by the DRL OPTION LINE input.
(1) NON-DRL OPTION: In the case that DRL OPTION LINE is not connected.
(2) DRL OPTION: In the case that DRL CANADA OPTION LINE is connected and electrically grounded.

10. DRL (CANADA)

If the IGN2 is ALT "L" are On, supply the power to the HEAD LAMP HIGH LAMP by turning the DRL CANADA RELAY ON.
If HEAD LAMP LOW RELAY is On by the HEAD LAMP switch, the DRL function shall be canceled. If the HEAD LAMP HIGH RELAY is On
by the HEADLAMP HIGH switch or PASSING switch, the DRL function shall be canceled.
If P/BRAKE switch is ON(PARK), the DRL function shall be canceled.
In IGN2 state, if the HEAD LAMP HIGH RELAY is On by the HEADLAMP HIGH switch or PASSING switch, the HEAD LAMP HIGH
INDICATOR shall be ON.

11. BUZZER SOUND

(1) BUZZER SOUND SPECIFICATION

(2) The Priority Order : S/BELT WARNING > KEY OPERATED WARNING > PARKING START WARNING
(3) If the output is OFF, maintain the output until the OFF cycle
(4) Sound pressure measurement distance : 1.0 m

12. SEAT BELT REMINDER

FROM STATE IGN1 ON DRIVER UNBELTED

Condition 1

Body Control Module|Locations|Page 3138 > < Body Control Module|Locations|Page 3136