Santa Fe FWD L4-2.4L (2010)
Variable Induction Control Actuator: Service and Repair
Variable Charge Motion Actuator (VCMA)
Components and Components Location
Components
CAUTION:
The VCM actuator has to be installed at the fully closing position of the VCM valve.
If it doesn't, the VCM coupling of the VCM shaft can't be put in the the VCM actuator.
Repair procedures
Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable.
2. Disconnect the VCMA connector (A).
3. Disconnect the engine coolant hose (B).
4. Remove the VCMA (A) after removing 3 installation bolts.